Estimated Arrival: Between Oct 01 and Oct 05. *ETA to USA Only
Shipping & Returns: Free Shipping [Continental USA Only]. All The Time. On all orders.
Notice: This product currently has an increased delivery time of 10-14 business days.
Beam Air Fume Extractor
The Beam Air is a universal fume extractor for laser cutters. Whether planning to buy a laser cutter for home, hobby, or business use, the Beam Air can provide the ability to minimize or eliminate a majority of particles and scents of materials in use for almost any laser cutter. If already using a laser cutter, the strong scents and particles that could be emitted from the laser cut material may be all too familiar. The Beam Air can efficiently solve these problems by using four layers of technologically advanced filters
Beamo- Beambox 40W- Beambox Pro 50W- Glowforge Pro - Glowforge Plus - Glowforge Basic - Dremel DigiLab LC40 - Emblaser 2 - Makeblock - K40 Laser Cutter …and many more!
Showcasing the universality of the Beam Air even more, almost any laser cutter’s hose can be connected to the Beam Air so that it can extract the particles from the air in the laser cutter, though it may require a simple tube reducer or expander to connect the sizing difference. Overall, the Beam Air is an ideal solution for many laser cutter users due to its ease of use, beneficial fume extracting ability, and its compatibility with so many laser cutters.
System Flow: 353 CFM - 195 CFM
Air Felt Interface: Φ 100mm
Product Size: 37 x 26 x 45 cm (14.57 x 10.24 x 17.72 in)
Package Size: 49 x 37 x 50 cm (19.29 x 14.57 x 19.69 in)
Weight: 17 kg (37.5 lbs)
Voltage: AC110V & AC220V
- Pre-Filter This is the first layer of defense! The pre-filter is positioned on the top of the Beam Air, so it is the first filter that will be preventing particles from passing through – coming from the laser cutter which is connected via a tube. Because this filter is the thinnest and the top layer, this filter will need to be replaced after every 10 – 30 hours of use.
- Medium Efficiency Filter Just below the pre-filter, the medium efficiency filter provides a buffer and further filtering out particles which managed to get through the pre-filter. To ensure the Beam Air is eliminating as many particles from passing to the outside environment, this filter will need to be replaced after every 50 – 150 hours of use.
- H13 HEPA Filter The third section of the Beam Air is known as the H13 HEPA Filter and as it is near the center of the Beam Air, it filters out the few remaining particles that may have penetrated past the other two filters. This filter will need to be replaced after every 100 – 200 hours of use.
- Activated Charcoal Filter This is the bottom filter, or final filter, of the Beam Air. Particles have to make it past three other filters to reach this one. This filter can eliminate almost all of the particles at this point, allowing for the Beam Air to be a proficient fume extractor. This long-lasting filter will need to be replaced after every 300 – 600 hours of use.
*Free 1 Year Manufacture Warranty
See "Quick Links" menu in footer
Flux Return Policy
You can return most merchandise for credit or refund within thirty (30) days of item delivery. Items may not be returned after thirty (30) days past their delivery date.
Flux lasers may be returned up to ten (10) business days from the date the customer receives it from the shipping company, subject to a minimum 20% restocking fee. These may not be returned after ten (10) days past their delivery date.
All returns require a return authorization (“RMA”) issued in advance by distributor/manufacturer. Any shipment received without an RMA could be shipped back at the sender’s expense. The RMA number should be added to the outside of the return package, and a copy of the Support Ticket should be included inside of the package. It is the responsibility of the customer to pay for any and all shipping costs relating to a return.
Returns must include all original equipment, accessories, manuals, cables, and documents; any missing accessory will be replaced at a fee. Printers, Laser Cutters, 3D Scanners, and CNC Machines that have been modified, damaged due to misuse or neglect, or have otherwise been subject to actions or conditions which would void the manufacturer’s warranty are not eligible for return.
Most manufacturers require that the printer be shipped in its original packaging for any warranty service. We strongly advise customers to retain original packaging for the duration of their printer’s warranty period.
Shipping fees associated with the return of a non-defective item are the responsibility of the customer.
In the case of items demonstrating a defect within thirty (30) days of delivery, Paradigm3D will issue a prepaid return shipping label (continental US returns only). Please note that items can be deemed defective only by the distributor's technical support team, or by the original manufacturer of the product. If a return shipping label is provided, the address included will be the original location the item was shipped to
Price Match Policy
See "Quick Links" menu in footer
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.